almost40_3girls
|
Posted:
Apr 20, 2005 - 08:31
THREAD
Hi 5.62 owners,
I had a known audio distortion problem in 5.62 where when logging video
from the analog video/audio inputs on the Pro BOB you would get very high
level and distorted audio every 15-30 seconds for about 5-10 seconds at a
time.
I posted about this and the only hint of a cure that was given was
something on the audio routing. Having just reloaded my machine to XP SP2
and put LE 5.51 on and upgraded it to 5.62, I opened the audio tool and
clicked on the Output Routing tab. On the right hand side of this window
there is a drop down for how the outputs are routed to the left and right
audio outputs. The drop down defaults to Custom and I moved mine to
Standard, which greys out your ability to set where the different audio
tracks will go. I then logged in about a half hour worth of composite
video and had no audio problems at all.
Maybe I should have figured this out before, but at least I have now and
wanted to pass this hint along to all the other users that have run into
this issue.
Also after my reload I noticed that I didn't have my live real time analog
video output and even the payback of video in the output monitor in LE was
very slow. I found that the desktop properties were set to span the
desktop across both monitors. When I turned off this option without
quiting and rebooting the machine the video monitor would blank out but
still no real time video out. I had to have the display properties set
correctly when the machine boots up for LE to operate correctly. This also
may have been known to everyone but me.
Lastly, I ordered the demo 6.0 DVD from Pinnacle. In a thread someone said
this was going to take 2-3 months to get. Is this right?
Thanks,
Jeff |
